Case Studies Thermal Oxidizers

The experienced staff at Kono Kog’s provides air pollution control equipment to a variety of clients and industries worldwide. Regardless of your industry, we can provide you with planning, installation, service, equipment and supplies to meet your needs at a significantly reduced price as compared to new air pollution control equipment. Kono Kog’s staff has extensive experience providing thermal oxidizers and catalytic oxidizers to industrial processes worldwide. Our experience includes the industries listed below.

Aerospace parts
Bakeries
Can Coating
- Case Study #1
- - Catalytic Oxidizer
Circuit Board Mfg.
Coil Coating
- Case Study #1
- - Regenerative Thermal Oxidizer(RTO)
Electronics Mfg.
Fabric coating
Flexographic Printing
- Case Study #1
- - Catalytic Oxidizer
- Case Study #2
- - Catalytic Oxidizer
Insulation Manufacturers
Paint Finishing Lines
- Regenerative Thermal Oxidizer (RTO)
- Catalytic Oxidizer
Petrochemical
Pressure Sensitive Adhesives
Rubberized Products
Structural Components
Textile Manufacturers
Visible Emissions
- Catalytic Oxidizer
Waste Water Treatment
Wood Finishing
Wall Covering

Automotive parts manufacturers
- Catalytic Oxidizer
- Direct thermal oxidizer
Chemical
- Regenerative Thermal Oxidizer (RTO)
Coffee Roasting
Coating & Laminating
Expanded polystyrene
Fiberglass Products
Graphic Arts Printing (Heat set web offset)
- Regenerative Thermal Oxidizer (RTO)
- Catalytic Oxidizer
Odor Control
- Catalytic Oxidizer
- Direct thermal oxidizer
- Regenerative thermal oxidizer
Packaging Film & Foil
- Catalytic Oxidizer
Pharmaceutical
Rotogravure Printing
- Catalytic oxidizer
Semiconductor
Soil Remediation
- Direct thermal oxidizer
Surface Coating
Vinyl Flooring
Wire Coating

Our Customers Say it Best

"We had two catalytic systems in operation when we purchased our first refurbished unit from Kono Kogs. We knew a catalytic system was the way to go, but the availability of a warranty on a used system, and Kono Kogs reputation, helped us make the final decision to buy a used system. The 1985 vintage unit looked great when we received it and it tested out great when we had our stack test (>98% VOC destruction). So when it was time to increase capacity for our other press lines, we did not hesitate to go back to Kono Kogs. They even made our second purchase easier by taking two older systems in trade on a refurbished unit."

"We are very pleased with the performance of the refurbished oxidizer. We greatly exceeded (98%+) our required VOC destruction efficiency and it has performed with >99% up time. The unit looks great as well, which was very important to us!"

"Altering production to avoid high odor days was fine until we were up against a delivery deadline; then the policy was thrown out the window as we strived to satisfy our customers. This was no way to run a business or be a good neighbor- short term or long term. An inexpensive solution from Kono Kogs provided us the flexibility every printer needs."

"After an early actuator failure, this RTO has been running very well. We are pleased with the equipment, cost savings, and with the support provided by Kono Kogs and their OEM partner on this project."

"Kono Kogs really got us out of a bind. We received our rental unit quickly to address our short term emergency. And now we have a more energy efficient system that will actually pay for itself in fuel savings. Kono Kogs provided us support like we would expect from new equipment vendors, but at a lower cost. This system has been installed for over two (2) years and it is still running great."

"We have been running our catalytic system for approximately 9 months and we just recently performed our stack test. Kono Kog's refurbished oxidizer provided 99.9% VOC destruction efficiency, greatly exceed their warranty of 97% and our NJ regulations of 95%. We would highly recommend Kono Kogs."

Kono Kogs, Inc.

Case Studies Thermal Oxidizers

Our Customers Say it Best