General Oxidizer Information
This Durr MEGTEC Systems Clean Switch 20,000 Regenerative Thermal Oxidizer (RTO) was well maintained and is in very good condition. Maximum capacity of 20,000 scfm. This MEGTEC RTO was built in 2001 and was used to treat fumes from multiple heatset printing presses. The RTO is still running and will be available in early 2020. This unit has VOC entrapment for very high VOC destruction rates and hot-side bypass for high solvent loading applications, as well as a recirculation for fuel saving operating in an idle mode.
This RTO was well maintained with annual PM inspections. Clean Switch RTOs are well built, highly reliable systems with long life expectancy.
95% effective heat exchanger (structured ceramic media in two chambers – MLM)
Rotary switching valve for flow changes thru the ceramic media
Main Exhaust fan with 125 hp TEFC motor and variable speed drive
Combustion blower with 15 hp TEFC motor
Gas train with Maxon Kinemax Size 4 burner
VOC entrapment feature for high VOC destruction and no visible emissions
Hot gas bypass feature for high VOC concentration airstreams
Recirculation feature for fuel savings in idle mode
Allen Bradley SLC 5/03 PLC with C-H Panelmate MMI
Exhaust stack (approx 30 feet from grade)
Complete owner’s manual with electrical and mechanical drawings.
Weight: Approx. 140,000 lbs
Dimensions: Approx. 33 feet long, 19 feet wide, 17 feet high w/o stack
Electrical Requirements: 460/3/60, 168 FLA
Gas requirements: 5,000 cfh max (at high fire)