** SOLD ** MEGTEC Millennium 4,000 Regenerative Thermal Oxidizer (RTO) ** SOLD **

Date Available:

THIS UNIT HAS BEEN SOLD

General Oxidizer Information

** THIS UNIT HAS BEEN SOLD ***

Used MEGTEC Millennium 4,000 Regenerative Thermal Oxidizer (RTO) for sale.

Manufactured in 2004. Regenerative Thermal Oxidizer (RTO) with 4,000 scfm capacity. In very good condition. Treated emissions at a printing plant until January of 2018. Plant was shut down and unit has been idle since. The system includes a hot-side bypass damper for high solvent-load conditions. Also, the unit includes a VOC entrapment (puff capture) feature for very high VOC destruction, and elimination of visible plume for high boiling point solvents.

Oxidizer Features

This Regenerative Thermal Oxidizer has the following features:

  • Maximum design flow- 4,000 scfm (at process temps up to 325F)
  • 95% effective heat exchanger (ceramic media in two chambers, brand new media 2 years ago)
  • Pre-piped gas train and Maxon Kinemax burner
  • Main RTO fan with 60 hp motor (belt drive) and Yaskawa P7 Variable Speed Drive
  • Combustion blower with 5.0 hp motor (direct drive)
  • Fresh-air damper with electric actuator.
  • Hot gas bypass feature: great for medium to high solvent conditions.
  • VOC entrapment chamber for attaining very high VOC destruction rates.
  • Allen Bradley SLC 5/04 PLC with remote operator panel for mounting near production line.
  • Stainless steel exhaust stack.  40’ feet from grade.
  • Strip chart recorder
  • Complete owner’s manual with all mechanical and electrical drawings

Oxidizer Specifications

MEGTEC Millennium 4,000 Regenerative Thermal Oxidizer specifications include:

  • Weight: 34,000 lbs
  • Footprint:  Approximately 18’ long, 17′ wide
  • Electric requirements:  100 Full Load Amps
  • Gas requirements:  950 cfh @ 5.0 psig +/- .25 psig  (maximum gas requirement)
  • Compressed Air: 5 CFM @ 80 PSI  (Dew Point= -40F)

Fast Quote

  • This field is for validation purposes and should be left unchanged.