Dürr Megtec Millennium 4000 Used RTO w/VOC

  • Durr MEGTEC Millennium 4000 regenerative thermal oxidizer for sale
  • IMG_8685


Used Durr MEGTEC Systems Millennium 4,000 Regenerative Thermal Oxidizer For Sale

This RTO has 4,000 scfm capacity. In good condition. Previously treated emissions from a heatset web offset (graphic arts) printing press.

This regenerative thermal oxidizer system has a number of features, including:

  • Design flow rate: 4,000 scfm (up to 350 degrees Fahrenheit process temperature)
  • 94% effective heat exchanger
  • Pre-piped gas train and Maxon Kinemax 2 burner
  • Main fan with 50 hp motor and Yaskawa variable speed drive
  • Combustion blower with 3 hp motor
  • Fresh air damper with electric actuator
  • Allen Bradley SLC 5/04 PLC with Cutler Hammer PanelMate MMI
  • Yokogawa strip chart recorder
  • Exhaust stack- stainless steel- 35′ from grade
  • VOC entrapment (puff capture) feature eliminates visible puff; increase VOC destruction
  • Complete owner’s manual with all mechanical and electrical drawings

See Before & After Photos of Refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

(approximate; Not for Design Purposes):


Approx 31,000 lbs


Approx 18' L x 9' W x 11'H (18'W including fan)

Electrical requirements

76 FLA (460V, 3 phase, 60 hz)

Gas requirements

960 cfh @ 5.0 psig +/- .25 psig

Compressed air

8-10 CFM @ 80 psi (-40 deg F dew point)

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.