Durr MEGTEC Systems Clean Switch 50,000 Used Regenerative Thermal Oxidizer (RTO)

  • CS 50,000 Overview
  • 20210929_123606
  • 20210929_123634
  • 20210929_123713
  • CS-50,000_B
  • 20211201_140753362_iOS
  • 20211201_140726103_iOS
  • 20211201_135108206_iOS
  • 20211201_134912443_iOS
  • 20211201_134838813_iOS

Description

Used Durr MEGTEC Systems Clean Switch 50,000 Regenerative Thermal Oxidizer For Sale

Durr Environmental-MEGTEC Systems 50,000 SCFM used regenerative thermal oxidizer (RTO) system. Consists of two (2)  25,000 scfm RTO systems run in tandem with a common control PLC & touchscreen. Previously treated heatset web offset emissions from a printing press.  Clean Switch RTOs are very well built with a small footprint (21′ x 35′).  In very good condition.

  • Maximum design flow: 50,000 scfm @ 350° F process exhaust temp.
  • Each System has:
  • Two media chamber design w/25,000 scfm capacity and structured ceramic media
  • 95% effective heat exchanger
  • Rotary Switching Valve – for flow direction changes thru the media (pneumatic drive)
  • Main exhaust fan with 125 hp motor
  • Variable Speed Drive
  • Nozzle Mix Burner- Maxon Kinemax 3
  • Combustion blower with 15 hp TEFC motor
  • Air Conditioned/Heated Control Room
    • Allen Bradley SLC 5/03 PLC with touchscreen HMI
  • VOC Entrapment feature (eliminates visible emissions; 99% VOC destruction typ)
  • Exhaust stack, 30′ from grade

See Before & After Photos of Refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

Specifications
(approximate; Not for Design Purposes):

Weight

118,000 lbs each (including ceramic media); 236,000 lbs total

Dimensions

Typical CS-25 Layout: 35' long, 20' wide, 27' H each RTO (excluding stack; including main fan)

Electrical Requirements

460/3/60, 188 FLA each (376 FLA total) (preliminary estimate)

Gas Requirements

3,000 cfh max each unit (6,000 cfh total) @ 5+/-0.25 psig @ 1000 btu/CF

Compressed Air Requirements

300 CFH each (600 CFH total) @ 90 psig and -40 deg F dew point

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.