Durr MEGTEC Systems MILLENNIUM 12,000 Used Regenerative Thermal Oxidizer (RTO)

  • Durr MEGTEC Millennium Used Regenerative Thermal Oxidizer (RTO) with a maximum capacity of 12,000 scfm
  • Used Durr MEGTEC RTO with 200hp motor on main fan
  • MIL 12000_A
  • Durr MEGTEC used RTO with VOC entrapment chamber
  • Durr MEGTEC Millennium Used Regenerative Thermal Oxidizer (RTO) with a maximum capacity of 12,000 scfm
  • Durr MEGTEC used RTO with Allen-Bradley Variable Speed Drive
  • Durr Megtec used RTO with Allen-Bradley SLC 5/03 PLC with Quartec MMI
  • Durr Megtec Millennium 12,000 RTO with Honeywell chart recorder
  • Durr Megtec Millennium 12,000 RTO with structured ceramic media
  • Durr Megtec Millennium 12,000 RTO with pneumatic poppet switching valves

Description

Used Durr MEGTEC System Millennium 12,000 Regenerative Thermal Oxidizer For Sale

Durr MEGTEC Millennium used regenerative thermal oxidizer (RTO) with a maximum capacity of 12,000 scfm.  In good condition.  Previously treated emissions from a heat-set printing press until 2012.  Has been off line since. Compact unit with integrated poppet and media chamber. Includes a VOC entrapment chamber for low opacity (visible emissions).

MEGTEC 12,000 Regenerative Thermal Oxidizer Features:

  • Pneumatic poppet switching valves
  • Ceramic media bed with 94% thermal effectiveness
  • Structured ceramic media provides low fan horsepower output
  • Main fan with 200 hp motor
  • VOC entrapment (puff capture) for increased destruction efficiency and elimination of visible emissions
  • Allen-Bradley Variable Speed Drive
  • Hot side bypass feature for high VOC concentration airstreams
  • Allen-Bradley SLC 5/03 PLC with Quartec MMI
  • Honeywell chart recorder
  • Complete owner’s manual with all mechanical and electrical drawings.

See Before & After Photos of Refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

Specifications
(approximate; Not for Design Purposes):

Weight

70,500 lbs [Unit only=63,500 lbs]

Footprint

Approximately 31’ long, 22' wide and 12' high (excluding exhaust stack)

Electrical requirements

182 Full Load Amps 460/3/60 Voltage

Gas requirements

2730 CFH @ 2.0 – 5.0 psi. (at full flow, cold start)

Compressed air

8 CFM @ 80 PSI & -40F dew point

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.