TANN Corp. 25,000 SCFM Used **Stainless Steel** Regenerative Thermal Oxidizer (RTO)

  • TANN 25000_Overall_A
  • Burner_TANN 25000
  • Ceramic Media Chamber_TANN 25000
  • Combustion Chamber_Burner TANN 25000_
  • Combustion Chamber_Internal_TANN 25000
  • Control Enclosure_TANN 25000
  • End View_TANN 25000
  • FAN_TANN 25000
  • PLC Cabinet_TANN 25000
  • PLC_TANN 25000
  • Poppets_External_TANN 25000
  • TANN 25000_Overall
  • TANN 25000_Overall_A
  • TANN 25000_Side View
  • TANN 25000_Side View_A


Used TANN Corp. 25,000 Regenerative Thermal Oxidizer For Sale

This TANN Corporation regenerative thermal oxidizer (RTO) has a maximum capacity of 25,000 SCFM and is in exceptional condition.  The unit had previously been used to treat emissions from a board mil until late 2020 when it was taken offline.

The stainless steel construction offers corrosion resistance for difficult emissions streams.   Due to its valve-under vertical orientation, this RTO model has a unique design that offers a small footprint so it requires very little real estate.

  • Design flow- 25,000 SCFM (up to 400 deg F);
  • 95% effective heat exchanger, random ceramic media
  • Pre-piped gas train
  • Exhaust (main) fan with 300 hp TEFC motor
  • Yaskawa Variable Speed Drive
  • Maxon Kinemax 4 burner
  • Combustion blower with TEFC motor (direct drive)
  • Fresh air damper with electric actuator
  • Air Conditioned Control House on RTO Skid
  • Allen Bradley CompactLogix PLC & PanelView Plus HMI
  • Yokogawa FX-1002 digital chart recorder
  • Exhaust stack 50′ from grade
  • Complete owner’s manual with electrical drawings

See Before & After Photos of Refurbished RTOs by Kono Kogs, or contact our team to speak with an expert.

(approximate; Not for Design Purposes):


200,000 lbs (estimated)

Approx. Footprint

50’ long, 23' wide (incl. exhaust stack) and 20' high (excl. exhaust stack) (estimated)

Electrical requirements

400 Full Load Amps (estimated)

Gas requirements

4500 cfh @ 2.0 – 5.0 psi. (at full flow, cold start) (estimated)

Compressed air

18 CFM @ 80 PSI (estimated)

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.