TANN Corp. 5000 Regenerative Thermal Oxidizer (RTO)

Description

Regenerative Thermal Oxidizer (RTO) with 5,000 scfm capacity. Manufactured in 2005 and has just been taken out of service. The RTO is in good condition and will need full refurbishing because it was idle so long. It has stainless steel construction, standard TANN poppet valve design. The ceramic media was taken out and will be replaced; ceramic saddle type. New ceramic media is included in the as-is and the refurbished options.

• Maximum design flow- 5,000 scfm at up to 350F process exhaust temp.
• 92% effective heat exchanger with all new ceramic media
• Single skid design for easy installation
• Poppet valves (pneumatically actuated) for flow direction changes through media
• Main exhaust fan with 50 hp TEFC motor and A-B Powerflex variable frequency drive
• Allen Bradley SLC 5/03 processor with a Cutler Hammer PanelMate Power Pro touch screen
• Eclipse burner
• Combustion blower with 5 hp TEFC motor
• Exhaust stack (30′ from grade)
• Isolation damper with actuator
•Fresh air damper with actuator
• Yokogawa  chart recorder
• Complete owner’s manual with electrical and mechanical drawings

 

Additional information

Weight

Approx. 12,000 lbs (including ceramic media)

Approximate footprint

17 feet long, 8 feet wide

Electrical Requirements

Total: 575/3/60, 160 FLA

Gas requirements

200 cfh max @ 5 psig (2” NPT connection)

Compressed Air requirements

5 cfm @ 80 psig, -40 deg F dew point

Request a Quote

Here's your new product tab.

  • This field is for validation purposes and should be left unchanged.