Durr Reeco RL 25,000 Used Regenerative Thermal Oxidizer (RTO)


Reeco Durr RL 25,000 scfm used Regenerative Thermal Oxidizer (RTO).  Manufactured in 2007 and treated paint spray booth emissions.  Reeco RL RTOs are well built with a small footprint (22′ x 32′). RTO was shut down in April 2020. In very good condition. Top layer of ceramic media should be replaced, and mechanical parts may need replacement due to length of idle time. Otherwise a robust system in good condition functionally.  Repaint recommended but not required. Available immediately.

Rotary switching valve, structured ceramic media, Allen Bradley CompactLogix PLC, 30 foot stack.

  • Maximum design flow: 25,000 scfm @ 150 deg F process exhaust temp.
  • Stacked media chamber design with structured ceramic media
  • 95% effective heat exchanger
  • Rotary Switching Valve – for flow direction changes thru the media (Electric drive)
  • Main exhaust fan with 125 hp motor
  • Allen Bradley Powerflex Variable Speed Drive
  • Nozzle Mix Burner- North Amaerican
  • Air Conditioned/Heated Control Room
    • Allen Bradley CompactLogix PLC with Allen Bradley Panelview Plus 700 touchscreen

Additional information


120,000 lbs (including ceramic media)


Approx 34' long, 22' wide, 15' H (excluding stack; including main fan)

Electrical Requirements

460/3/60, 162 FLA

Gas Requirements

3,000 cfh max @ 5+/-0.25 psig @ 1000 btu/CF

Compressed Air Requirements

720 CFH @ 90 psig and -40 deg F dew point

Request a Quote

Here's your new product tab.

  • This field is for validation purposes and should be left unchanged.