Dürr Megtec Millennium 4000 Used Regenerative Thermal Oxidizer (RTO)

  • Used Durr MEGTEC Systems Millennium 4,000 scfm RTO for sale
  • Used Durr MEGTEC Systems Millennium 4,000 scfm RTO outside graphic arts printing press facility
  • Rectangular ductwork connected to used Durr MEGTEC RTO
  • Cutler Hammer PanelMate MMI for used Durr RTO process controls
  • Used Durr MEGTEC Systems Millennium 4,000 scfm regenerative thermal oxidizer
  • Used Durr MEGTEC Systems Millennium 4,000 scfm RTO for sale
  • Pre-piped gas train and Maxon Kinemax 2 burner as part of Durr RTO system
  • Allen Bradley SLC 5/04 PLC used with Durr RTO system

Description

Used Durr MEGTEC Systems Millennium 4,000 Regenerative Thermal Oxidizer For Sale

This RTO has 4,000 scfm capacity. In good condition. Previously treated emissions from a heatset web offset (graphic arts) printing press.

This regenerative thermal oxidizer system has a number of features, including:

  • Design flow rate: 4,000 scfm (up to 350 degrees Fahrenheit process temperature)
  • 94% effective heat exchanger
  • Pre-piped gas train and Maxon Kinemax 2 burner
  • Main fan with 30 hp motor and Yaskawa variable speed drive
  • Combustion blower with 5 hp motor
  • Fresh air damper with electric actuator
  • Allen Bradley SLC 5/04 PLC with Cutler Hammer PanelMate MMI
  • Yokogawa strip chart recorder
  • Complete owner’s manual with all mechanical and electrical drawings

See Before & After Photos of Refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

Specifications
(approximate; Not for Design Purposes):

Weight

Approx 24,250 lbs

Footprint

Approx 12' L x 9' W x 11'H (18'L including fan)

Electrical requirements

47 FLA (460V, 3 phase, 60 hz)

Gas requirements

960 cfh @ 5.0 psig +/- .25 psig

Compressed air

8-10 CFM @ 80 psi (-40 deg F dew point)

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.