TANN Corp. 5000 Used Regenerative Thermal Oxidizer (RTO)

  • TANN Corp. Used Regenerative Thermal Oxidizer (RTO) 5,000 scfm for sale
  • saddle type new ceramic media inside RTO
  • natural gas line hookups for TANN RTO
  • Allen Bradley SLC 5/03 processor with a Cutler Hammer PanelMate Power Pro touch screen
  • back side of TANN 5000 RTO with view of airflow switching valves
  • Combustion blower with 5 hp TEFC motor
  • Main exhaust fan with 50 hp TEFC motor and A-B Powerflex variable frequency drive
  • ladder and access platform for TANN 5000 RTO
  • TANN Corp. Used Regenerative Thermal Oxidizer (RTO) 5,000 scfm for sale
  • D7C0F871-2F01-4B9D-A593-BABC1466433A_1_105_c
  • F481E5A6-81B7-466B-AC83-695B6C0AD8A5_1_105_c

Description

Used TANN Corp. 5,000 Regenerative Thermal Oxidizer For Sale

Regenerative Thermal Oxidizer (RTO) with 5,000 scfm capacity. It has been idle for a few years, but is in good condition. Standard TANN poppet valve design.

  • Maximum design flow- 5,000 scfm at up to 350°F process exhaust temp.
  • 92% effective heat exchanger with random packed ceramic media
  • Single skid design for easy oxidizer installation
  • Poppet valves (pneumatically actuated) for flow direction changes through media
  • Main exhaust fan with 50 hp TEFC motor and A-B Powerflex variable frequency drive
  • Allen Bradley SLC 5/03 processor with a Cutler Hammer PanelMate Power Pro touch screen
  • Eclipse burner
  • Combustion blower with 5 hp TEFC motor
  • Exhaust stack (30′ from grade)
  • Isolation damper with actuator
  • Fresh air damper with actuator
  • Yokogawa  chart recorder
  • Complete owner’s manual with electrical and mechanical drawings

See Before & After Photos of Refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

Specifications
(approximate; Not for Design Purposes):

Weight

Approx. 50,000 lbs (including ceramic media)

Approximate footprint

17 feet long, 8 feet wide

Electrical Requirements

Total: 460/3/60, 160 FLA

Gas requirements

200 cfh max @ 5 psig (2” NPT connection)

Compressed Air requirements

5 cfm @ 80 psig, -40 deg F dew point

* Values displayed are approximate, do not use for design.

Request a Quote

  • This field is for validation purposes and should be left unchanged.