Durr Megtec Millennium 4000 Used Regenerative Thermal Oxidizer (RTO)

Durr Megtec Millennium 4000 Used Regenerative Thermal Oxidizer (RTO)

Durr MEGTEC regenerative thermal oxidizer (RTO) with 4,000 scfm capacity for sale; including performance and parts warranty. Previously treated printing press emissions.

Request a Quote
No items found.

Equipment Details

Used Durr MEGTEC Systems Millennium 4,000 Regenerative Thermal Oxidizer For Sale

This RTO has 4,000 scfm capacity, in good condition. Previously treated emissions from a heatset web offset (graphic arts) printing press.

This regenerative thermal oxidizer system has a number of features, including:

     
  • Design flow rate: 4,000 scfm (up to 350 degrees Fahrenheit process temperature)
  •  
  • 94% effective heat exchanger
  •  
  • Pre-piped gas train and Maxon Kinemax 2 burner
  •  
  • Main fan with 30 hp motor and Yaskawa variable speed drive
  •  
  • Combustion blower with 5 hp motor
  •  
  • Fresh air damper with electric actuator
  •  
  • Allen Bradley SLC 5/04 PLC with Cutler Hammer PanelMate MMI
  •  
  • Yokogawa strip chart recorder
  •  
  • Complete owner’s manual with all mechanical and electrical drawings

See more case studies and photos of refurbished RTO units by Kono Kogs, or contact our team to speak with an expert.

Equipment Specifications

  • Type of Equipment:
  • Brand:
    Dürr Environmental‍
  • Approx. Footprint:
    Approx 12' L x 9' W x 11'H (18'L including fan)
  • Weight:
    Approx 24,250 lbs
  • Electrical Requirements:
    47 FLA (460V, 3 phase, 60 hz)
  • Gas Requirements:
    960 cfh @ 5.0 psig +/- .25 psig
  • Compressed Air Requirements:
    8-10 CFM @ 80 psi (-40 deg F dew point)

Request A Quote

You can also call Buster at 920-309-0725 or send us an email.

1
2
3
4

Contact details

Please fill out the required fields

1
2
3
4

Equipment Details

If you're not sure about items in this section, just submit your contact details, and Chris 'Buster' Heikkila will give you a call.
1
2
3
4

Details of the request *

1
2
3
4

Submit your request for quote

Before submitting, please take a moment to review all the information you've provided in the previous steps for accuracy and completeness. Thank you!

Previous step
Next step

Thank you! Your submission has been received!

Thank you for submitting a request for quote! Buster will reach out to you shortly with next steps. If you need immediate assistance, please call: 920-309-0725 or email sales@konokogs.com.

We're sorry, but there seems to be an issue with submitting your form. Please try again, and ensure that all required fields are filled out correctly. If the problem persists, please contact our sales team for assistance at 920-309-0725 or sales@konokogs.com.

Before & After Example